DRT2-[]D16SL(H)(-1) / []D32SLH(-1) Screw-less Clamp Terminals with Transistors/Specifications | OMRON Bangladesh By Kyoto Engineering & Automation

Communications power supply voltage	11 to 25 VDC (Supplied from the communications connector.)
Communications power supply current consumption	DRT2-ID32SLH(-1): 65 mA DRT2-OD32SLH(-1): 55 mA DRT2-MD32SLH(-1): 60 mA
Noise immunity	Conforms to IEC61000-4-4, 2 kV (power line)
Vibration resistance	10 to 60 Hz, 0.7-mm double amplitude, 60 to 150 Hz, 50 m/s² for 80 min each in the X, Y, and Z directions
Shock resistance	150m/s², 6 directions, 3 times each
Dielectric strength	500 VAC (between isolated circuits)
Insulation resistance	20 M Ω min. (between isolated circuits)
Ambient operating temperature	-10°C to 55°C
Ambient operating humidity	25% to 85% (with no condensation)
Ambient operating atmosphere	No corrosive gases
Ambient storage temperature	-20°C to 65°C
Mounting method	DIN 35 mm-track mounting
Weight	480 g max.

Model	DRT2-ID16SL	DRT2-ID16SL-1	DRT2-ID16SLH	DRT2-ID16SLH-1
Internal I/O common	NPN	PNP	NPN	PNP
Input points	16 inputs
I/O power supply voltage	20.4 to 26.4 VDC (24 VDC -15%/+10%)
Input current	24 VDC: 6.0 mA max./point 17 VDC: 3.0 mA max./point
Input resistance	4 k Ω
ON delay time	1.5 ms max.
OFF delay time	1.5 ms max.
ON voltage	15 VDC min. (between each input terminal and V)	15 VDC min. (between each input terminal and G)	15 VDC min. (between each input terminal and V)	15 VDC min. (between each input terminal and G)
OFF voltage	5 VDC max. (between each input terminal and V)	5 VDC max. (between each input terminal and G)	5 VDC max. (between each input terminal and V)	5 VDC max. (between each input terminal and G)
ON current	3.0 mA max.
OFF current	1.0 mA max.
Number of circuits per common	16 per common
Power short-circuit protection	---		Operates at 50 mA/point min.
Disconnection detection	---		Operates at 0.3 mA/point max.
Input power supply current	100 mA per point		50 mA per point

Model	DRT2-ID32SLH	DRT2-ID32SLH-1
Internal I/O common	NPN	PNP
Input points	32 inputs
I/O power supply voltage	20.4 to 26.4 VDC (24 VDC -15%/+10%)
Input current	6.0 mA max. per point at 24 VDC 3.0 mA max. per point at 17 VDC
Input resistance	4 k Ω
ON delay time	1.5 ms max.
OFF delay time	1.5 ms max.
ON voltage	15 VDC min. (between each input terminal and V)	15 VDC min. (between each input terminal and G)
OFF voltage	5 VDC max. (between each input terminal and V)	5 VDC max. (between each input terminal and G)
ON current	3 mA min.
OFF current	1.0 mA max.
Number of circuits per common	16 per common
Power short-circuit protection	Operates at 50 mA/point min.
Disconnection detection	Operates at 0.3 mA/point max.

Model	DRT2-OD16SL	DRT2-OD16SL-1	DRT2-OD16SLH	DRT2-OD16SLH-1
Internal I/O common	NPN	PNP	NPN	PNP
I/O points	16 outputs
I/O power supply voltage	20.4 to 26.4 VDC (24 VDC -15%/+10%)
Output current	0.5 A per point, 4 A per common
Residual voltage	1.2 V max.
Leakage current	0.1 mA max.		0.1 mA max. *1
ON delay time	0.5 ms max.
OFF delay time	1.5 ms max.
Disconnection detection	---		*2
Output power supply current	100 mA per point
Output for errors	According to hold/clear setting for errors (default: clear)

Note 1: To enable detection of external load disconnections, a current of 0.1 mA or less is output to the load even when
the output is OFF. Make sure that the load will not operate for this current.
Note 2: Disconnection detection can be used when the load current is 3 mA or higher. If the load current is less than 3
mA, disconnections may be falsely detected.

Model	DRT2-OD32SLH	DRT2-OD32SLH-1
Internal I/O common	NPN	PNP
I/O points	32 outputs
I/O power supply voltage	20.4 to 26.4 VDC (24 VDC -15%/+10%)
Output current	0.5 A per point, 4 A per common
Residual voltage	1.2 V max.
Leakage current	0.1 mA max. (See Note: 1.)
ON delay time	0.5 ms max.
OFF delay time	1.5 ms max.
Disconnection detection	(See Note: 2.)
Output for errors	According to hold/clear setting for errors (default: clear)

Note 1: To enable detection of external load disconnections, a current of 0.1 mA or less is output to the load even when
the output is OFF. Make sure that the load will not operate for this current.
Note 2: Disconnection detection can be used when the load current is 3 mA or higher. If the load current is less than 3
mA, disconnections may be falsely detected.

Model	DRT2-MD32SLH	DRT2-MD32SLH-1
Internal I/O common	NPN	PNP
Input points	16 inputs
I/O power supply voltage	20.4 to 26.4 VDC (24 VDC -15%/+10%)
Input current	6.0 mA max. per point at 24 VDC 3.0 mA max. per point at 17 VDC
Input resistance	4 k Ω
ON delay time	1.5 ms max.
OFF delay time	1.5 ms max.
ON voltage	15 VDC min. (between each input terminal and V)	15 VDC min. (between each input terminal and G)
OFF voltage	5 VDC max. (between each input terminal and V)	5 VDC max. (between each input terminal and G)
ON current	3 mA min.
OFF current	1.0 mA max.
Number of circuits per common	16 per common
Power short-circuit protection	Operates at 50 mA/point min.
Disconnection detection	Operates at 0.3 mA/point max.

Model	DRT2-MD32SLH	DRT2-MD32SLH-1
Internal I/O common	NPN	PNP
I/O points	16 outputs
I/O power supply voltage	20.4 to 26.4 VDC (24 VDC -15%/+10%)
Output current	0.5 A per point, 4 A per common
Residual voltage	1.2 V max.
Leakage current	0.1 mA max. (See Note: 1.)
ON delay time	0.5 ms max.
OFF delay time	1.5 ms max.
Disconnection detection	(See Note: 2.)
Output for errors	According to hold/clear setting for errors (default: clear)

Note 1: To enable detection of external load disconnections, a current of 0.1 mA or less is output to the load even when
the output is OFF. Make sure that the load will not operate for this current.
Note 2: Disconnection detection can be used when the load current is 3 mA or higher. If the load current is less than 3
mA, disconnections may be falsely detected.

DRT2-[]D16SL(H)(-1) / []D32SLH(-1)

Reduced Wiring and Labor on Factory Sites with Screw-less Terminal Wiring

General Specifications

I/O Specifications

16-point Inputs Terminals with Transistors (Input Specifications)

32-point Inputs Terminals with Transistors (Input Specifications)

16-point Outputs Terminals with Transistors (Output Specifications)

32-point Outputs Terminals with Transistors (Output Specifications)

16-point Inputs/16-point Outputs Terminals with Transistors (Input Specifications)

16-point Inputs/16-point Outputs Terminals with Transistors (Output Specifications)

Product Category