NYM

Industrial PC Platform NY-series Industrial Monitor

NYM

Very stylish, very industrial

Item list of NYM

Software downloads

You can download software for the NY Series Industrial PC Platform.

about this Product Family

Inquiry of this Product

Features
Lineup
Specifications
Dimensions
Catalog

last update: November 28, 2016

Specifications

Performance Specifications

Item			Specifications
Item			NYM12W-C100[]	NYM15W-C100[]
Display	Display panel *1	Display device	TFT LCD
		Screen size	12.1 inches	15.4 inches
		Surface treatment	Anti glare treatment
		Surface hardness	Mohs scale: 5 - 6
		Resolution	1,280 ✕ 800 pixels at 60 Hz (horizontal ✕ vertical)
		Colors	16,770,000 colors
		Effective display area	261 ✕ 163 mm (horizontal ✕ vertical)	331 ✕ 207 mm (horizontal ✕ vertical)
		View angles	Left: 60°, Right: 60°, Top: 60°, Bottom: 60°
		Life	50,000,000 operations min.
		EMC	Correct touchscreen operation is possible within allowable EMC immunity conditions
	Touch	Technology	Projected capacitive
		Touch resolution	Touch accuracy 1.5% (4-5 mm)
		Multitouch	Up to 5 simultaneous touches
		Features	Water detection 2, hand palm rejection 3, gloves *4
	Backlight	Life	50,000 hours min. *5
	Backlight	*Brightness adjustment 6**	200 levels
Connectors	Power connector		24 VDC
	DVI-D connector	Video interface	Digital only
		Resolution	1,280 x 800 pixels at 60 Hz
		Maximum cable length	15 m
	USB Type-A connectors		USB connectors for external device connection
		Number of ports	2
		Standards	USB 2.0
		Current	500 mA max.
		Maximum cable length	5 m
	USB Type-B connector		USB connector for connection with the host PC
		Number of ports	1
		Standards	USB 2.0
		Maximum cable length	5 m

*1. There may be some defective pixels in the display.
      This is not a fault as long as the numbers of defective light and dark pixels fall within the following standard range:
      light and dark pixels 10 or less. (There must not be 3 adjacent light/dark pixels.)
*2. If water is detected the touch functionality will not be available.
*3. If a palm is detected that specific area is neglected.
*4. The touchscreen can be operated when wearing gloves.
      Confirm the touchscreen can be operated with gloves before actual operation.
*5. This is the estimated time before brightness is reduced by half at room temperature and humidity.
      The life expectancy is drastically shortened if used at high temperatures.
*6. If the brightness is set to very dark, it causes flickering or the screen will be too dark to use.

Electrical Specifications

Item	Specifications
Item	NYM12W-C100[]	NYM15W-C100[]
Rated power supply voltage	24 VDC
Allowable power supply voltage range	19.2 to 28.8 VDC
Grounding method	Ground to less than 100 Ω
Power consumption	25 W max.
Inrush current	At 24 VDC: 5 A / 10 ms max.
Overvoltage category	JIS B3502 and IEC 61131-2: Category II
EMC immunity level	IEC 61132-2: Zone B

Components and functions

The Industrial Monitor is intended to be used as a display and touch interface for the Industrial PC Platform variants. The Industrial Monitor allows the user to interact through touch interactions on the LCD display.

Operation Environment Specifications

Item	Specifications
Ambient operating temperature	0 to 55°C *1
Ambient storage temperature	-20 to 70°C *1
Ambient operating humidity	10% to 90% with no condensation *1
Ambient storage humidity	10% to 90% with no condensation *1
Operating atmosphere	No corrosive gases
Altitude	2,000 m max.
Pollution degree	2 or less: Conforms to JIS B3502 and IEC 61131-2
Noise resistance (during operation)	Conforms to IEC61000-4-4, 2kV (power lines)
Vibration resistance (during operation)	Conforms to IEC 60068-2-6. 5 to 8.4Hz with 3.5 mm single amplitude and 8.4 to 150 Hz with 9.8 m/s² for 10 times each in X, Y and Z directions
Shock resistance (during operation)	Conforms to IEC 60028-2-27. 147 m/s², 3 times in each X, Y and Z directions
Degree of protection	Front of product: IP65 *2
*Applicable standards 3**	EU Directives: EMC Directive 2014/30/EU (EN 61131-2), KC Registration, RCM

*1. See Temperature and Humidity Specifications.
*2. The Industrial Monitor may not operate properly in locations subjected to oil splashes for extended periods of time.
*3. Refer to the OMRON website (www.ia.omron.com) or contact your OMRON representative for the most recent applicable standards for each model.

Temperature and Humidity Specifications

The allowed ambient temperature and humidity conditions during operation and storage for the Industrial Monitor are specified in the following graphs.

• Operate the Industrial Monitor within the following ambient temperature and humidity ranges.

The ambient operating temperature specifications do not depend on the mounting angle, orientation or display size.
• Store the Industrial Monitor within the following ambient temperature and humidity ranges.

last update: November 28, 2016

Product Category

Automation Systems
- Industrial PC Platform
  - NY5[][]-1
  - NY53[]-5[]00
  - NYB
  - NYP
  - NYM
  - NY51[]-A

Top of Page