Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

FL Series

Lighting for Image Processing

FL Series

Next generation ODR technology

Item list of FL Series

about this Product Family

Related Contents

last update: October 23, 2013

Bar Lighting

Model Wide Area
Model		 High-brightness
Models		 Wide Area
Model		 High-brightness
Models		 Wide Area
Model		 High-brightness
Models
FL-BR5020W FL-BR5020W-H FL-BR9120W FL-BR9120W-H FL-BR13120W FL-BR13120W-H
Light source White LEDs
Vibration resistance 10 to 150 Hz (Double amplitude:0.7 mm),80 min each in X,Y,and Z directions
Shock resistance 150 m/s2 3 times each in 6 directions
Ambient temperature Operation:0 to 40°C,Storage:-15 to 60°C (with no icing or condensation)
Ambient humidity Operation or storage:35%to 85%(with no condensation)
Ambient atmosphere No corrosive gases.
Degree of protection IEC60259 IP20
Weight Approx.40g Approx.70g Approx.100g
Materials Light:Case:Aluminum; Cover,side parts,and lens:Heat resistant polyvinyl chloride; Connector:Thermoplastic resin with glass
LED Class Risk Group 2 (IEC62471-2)
Accessories Instruction manual

The color of white LEDs can vary due to intrinsic characteristics.
Confirm suitability for the application in advance.

Direct Ring Lighting

Model Wide Area
Model		 High-brightness
Models		 Wide Area
Model		 High-brightness
Models		 Wide Area
Model		 High-brightness
Models
FL-DR32W FL-DR32W-H FL-DR50W FL-DR50W-H FL-DR90W FL-DR90W-H
Light source White LEDs
Vibration resistance 10 to 150 Hz (Double amplitude:0.7 mm),80 min each in X,Y,and Z directions
Shock resistance 150 m/s2 3 times each in 6 directions
Ambient temperature Operation:0 to 40°C,Storage:-15 to 60°C (with no icing or condensation)
Ambient humidity Operation or storage:35%to 85%(with no condensation)
Ambient atmosphere No corrosive gases.
Degree of protection IEC60259 IP20
Weight Approx.25g Approx.30g Approx.70g Approx.80g
Materials Light:Case:Aluminum; Cover,side parts,and lens:Heat resistant polyvinyl chloride; Connector:Thermoplastic resin with glass
LED Class Risk Group 2 (IEC62471-2)
Accessories Instruction manual

The color of white LEDs can vary due to intrinsic characteristics.
Confirm suitability for the application in advance.

Lighting Controller

Product name One-channel models Two-channel models
I/O type NPN PNP NPN PNP
Model FL-STC10 FL-STC15 FL-STC20 FL-STC25
Power supply voltage DC24V±10% (including ripple)
Power consumption 36 W, 1.5 A max.
(including the lighting section)		 72 W, 3 A max.
(including the lighting section)
Number of output channels 1 2
Applicable lights FL-[] Series
Light
control
modes		 Continuous
light emission
mode		 While the Strobe Controller power source is ON, light is continuously emitted.
PWM frequency: 100 kHz, Light adjustment: 400 levels
Triggered light
emission mode		 Light emission is synchronized with an external trigger input.
Light emission: Continuous while the trigger is input, or 0.1 to 99.9 ms (set in 0.1-ms
increments)
PWM frequency: 100 kHz, Light adjustment: 400 levels
Strobe light
emission mode		 Light emission is synchronized with the external trigger input, but twice the amount of
light is emitted in comparison with the trigger light emission mode.
Light emission pulse width: 0.01 to 5 ms (light adjustment: 500 levels equivalent)
Light
adjustment
setting		 Operation on
the light		 Light adjustment mode settings and light adjustment value input: slide switch and
directional pad
Remote
operation		 Light adjustment value input: 9-bit binary input
External interface Parallel I/O connector (D-sub 15-pin), Terminal block (external trigger input with 2
terminals, power source voltage input with 2 terminals)
Ambient temperature Operation: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation)
Ambient humidity Operation or storage: 35% to 85% (with no condensation)
Vibration resistance 10 to 150 Hz (Double amplitude: 0.7mm), 80 min each in X, Y, and Z directions
Shock resistance 150 m/s2 3 times each in 6 direction (up-down, left-right, front-back)
Materials Case: PC
Degree of protection IEC60529 IP20
Weight Approx. 100 g
Accessories Instruction manual,Terminal block Connector

Lighting Controller

Model Lighting Controller
Model Name FL-TCC1
Input Voltage Supplied from compatible camera.
Compatible Cameras FH-S/SC/S02/SC02/S04/SC04,
FZ-S/SC/S2M/SC2M/S5M2/SC5M2/SH/SHC/SF/SFC/SP/SPC and others.
Compatible Controllers FH Series, FZ5 Series, FZ4 Series and others.
Currant Consumption MAX 10W, 0.9A (Lighting Included)
Lighting Channel 1
Applicable Lighting FL-[] series
Luminance
Control
Method		 PWM frequency: 100 KHz, Control step: 255 steps (configurable from the Controller)
Trigger lighting Lighting ON synchronized with trigger input timing from the Controller.
(Auto setting in accordance with the shutter speed.)
Trigger lighting
delay time		 Ton: 30 μs max. (Trigger ready μs)
Toff: 10 μs max.
External Interface Dedicated communication connector
Ambient Temperature Operating: 0 to +50°C, Storage: -15 to +60°C (with no icing or condensation)
Ambient Humidity Operating and storage: 35% to 85% (with no condensation)
Vibration resistance 10 to 55 Hz, (0.7mm double amplitude) 80 min each in X, Y, and Z directions
Shock resistance 150 m/s2 3 times each in 6 directions(up/down, left/right, forward/backward)
Materials Case: SECC, Cable: PVC
Degree of Protection IP20 (IEC60529)
Weight Approx. 110 g
Accessories Instruction sheet, Insulation Sheet, Mounting screw (M2 x 6 mm) x 4

last update: October 23, 2013

Product Category

© Copyright Kyoto Engineering & Automation Ltd. All Rights Reserved.