SGE / SCC

Model	SCC-1224 SCC-1224ND
Safety edge inputs	Up to five series connections on the safety edges
Response time	13 ms max.
Power supply voltage	115 VAC±5%, 3.3 VA or 24 VDC±10%, 1.5 VA
Safety output	DPST-NO (Rated resistive load: 250 VAC/30 VDC 4A)
Auxiliary output	SPST-NO SCC-1224: One-shot timer that turns ON between two and three seconds after the application of pressure to the safety edge SCC-1224ND: Kept ON during the application of pressure to the safety edge (Rated resistive load: 250 VAC, 2.5 A/30 VDC, 2.5 A)
Terminating resistor	8.2 kΩ
Ambient operating temperature	-20 to 50°C (With no icing or condensation)
Degree of protection	IP20
Terminal type	Screw terminals
Terminal tightening torque	0.5 to 0.6 Nm
Mounting method	DIN rail mounted
Weight (factory-set)	210 g

Model	SGE-125	SGE-225 *4	SGE-245 SGE-245L	SGE-365
Material *1	TPE	EPDM
Material hardness	65 Shore A	68 Shore A
Max. length of a single safety edge	6.1 m
Actuation distance *2	2.6 mm	3.9 mm	7.4 mm	5.2 mm
Actuation force *2	42 N	57 N	68 N	78 N
Maximum allowable load	500 N
Overtravel distance *2 (400 N)	9.5 mm	6.7 mm	18.3 mm	33.8 mm
Maximum operation angle	2 x 30°		2 x 45°
Inactive end region *3	20 mm	40 mm	20 mm
Connecting cable	2 conductors, 0.34 mm2, Allowable bending radius: R38mm Cable Specifications Type: PUR (Polyurethane) Round lead cable External diameter: 3.5 dia. Number of conductors: 2 conductors Cross-section of conducto: 0.34 mm2 Insulator diameter: 1.2 dia.
Mechanical durability	10,000 operations min.
Ambient temperature	During operation: -10 to 55°C (with no icing), During storage: -25 to 75°C (with no icing)
Operating ambient humidity	0 to 90%RH
Degree of protection	IP65
Unit weight	0.18 kg/m	0.51 kg/m	0.77 kg/m (SGE-245) 0.82 kg/m (SGE-245L)	1.10 kg/m

*1. TPE: Thermoplastic Elastomer
      EPDM: Ethylene Propylene Rubber
*2. Values of actuation distance and actuation force are characteristic values tested according to EN 1760-2 using a test
       object of ϕ80 mm and actuating point C3 under a test temperature of 20°C and test speed v = 10 mm/s. Refer to
       “Characteristics” on Catalog for details.
*3. There is an inactive region (including an end cap) in both ends of the safety edge.
      
*4. The SGE-225 can be used for finger protection.The actuation force is 20 N when the SGE-225 is used for finger
       protection.
       (Characteristic values tested according to EN 1760-2 using a test object of ϕ20 mm and actuating point C3 under a
       test temperature of 20°C and test speed v = 10 mm/s)

Material	TPE						EPDM
Model	SGE-125						SGE-225, SGE-245, SGE-365
Features Strength *	1	2	3	4	5	6	1	2	3	4	5	6
Tear Strength (Resistance)			3						3
Ultimate Tensile Strength			3						3
Rebound Elasticity at 20°C		2						2
Resistance Against Permanent Deformation			3	4				2
Abrasion			3						3
Elongation at Tear				4	5				3
Cold Flexibility		2						2

Note: 1 = Excellent
          2 = Very good
          3 = Good
          4 = Fair
          5 = Poor
          6 = Very poor

Material	TPE						EPDM
Model	SGE-125						SGE-225, SGE-245, SGE-365
Features Tolerance *	1	2	3	4	5	6	1	2	3	4	5	6
Heat Stability				4				2
Oxidation Stability	1						1
UV Stability	1						1
Weather/Ozone Resistance	1						1
Flame Resistance						6						6
Gas Permeability			3							4

Note: 1 = Excellent
          2 = Very good
          3 = Good
          4 = Fair
          5 = Poor
          6 = Very poor

Material	TPE						EPDM
Model	SGE-125						SGE-225, SGE-245, SGE-365
Features Effects *	1	2	3	4	5	6	1	2	3	4	5	6
Water Resistance	1						1	2
Diluted Acids	1							2
Diluted Bases	1							2
Non-Oxidizing Acids		2						2
Oxidizing Acids		2								4
ASTM Oil #3		2										6
Vegetable Oils	1	2									5
Organic Solvents								2
Ester Solvents		2	3					2
Ketone Solvents (Containing Oxygen)		2	3						3
Aliphatic Hydrocarbons Solvents (Gasoline)											5
Aromatic Hydrocarbons												6
Hydrocarbons		2	3								5	6
Alcohol	1						1

Note: 1 = No Effects, Permanent Contact
          2 = Few Effects, Some Contact
          3 = Medium Effects, Some Contact
          4 = Noticeable Effects, Reduced Contact
          5 = Severe Effects, Very Brief Contact
          6 = Extreme Effects, Avoid Contact