H5CN-XAN DC12-48

Digital Timer

Image

Quartz Timer, 48×48×97.6 mm, 12 to 48VDC

Rated supply voltage	12 to 48 VDC Permissible ripple: 20% max.
Time range	0.01s to 99.99s
Input method	No-voltage input
Output modes	N (Power ON delay)
Control output	SPDT
Display method	7-segment LEDs
Character height	Present value: 10 mm (Red) Not equipped
External connection method	8-pin round socket

Item list of H5CN

Ratings/Performance
Dimensions
Terminal arrangement
Block diagram
Operating chart
Electrical life

Ratings/Performance

As of August 8, 2016


Rated supply voltage	12 to 48 VDC Permissible ripple: 20% max.
Operating voltage range	85% to 110% of rated supply voltage
Power consumption	Approx. 2.5W (at 48 VDC)
Time ranges（Number of ranges）	1
Time ranges	0.01 s to 99.99 s
Select method	Thumbwheel Switch
Input signals	Reset, Gate
Input method	No-voltage input
Minimum input signal width	20 ms(Reset, Gate)
Output modes	N (Power ON delay)
Control output （Contact output）	Type: SPDT Switching capacities (Resistive load): 3 A at 250 VAC/3 A at 24 VDC Switching capacities (Inductive load): 1 A 250 VAC (cos phi=0.4) / 2.5 A 24 VDC ( L/R=7 ms) Minimum applicable load: 10 mA at 5 VDC (failure level: P)
Reset system	Power reset / External reset
Power reset	Minimum power-opening time: 0.5 s
Timer mode	UP display timer (increments form 0 to the set time)
Display method	7-segment LEDs
Digit	4 digit
Character height	Present value: 10 mm (Red) Not equipped
Ambient temperature	Operating: -10 to 55 ℃ Storag: -25 to 65 ℃ (with no icing or condensation)
Ambient humidity	Operating: 35 to 85%RH Storag: 35 to 85%RH
Total accuracy	Accuracy of operating time setting error temperature influences and voltage influences (including the rise time of the power source and the operating times of the internal and output circuits). Power-ON start: +/- 0.01% +/- 50 ms max. The values are based on the set value. Accuracy of operating time setting error temperature influences and voltage influences (including the rise time of the power source and the operating times of the internal and output circuits). Reset start: +/- 0.005% +/- 30 ms max. The values are based on the set value.
Insulation resistance	100 MΩ min. (at 500 VDC) between current carrying metal parts and exposed non-current carrying metal parts / between operating power circuit and control output circuit
Dielectric strength	between current-carrying terminals and exposed non-curernt-carrying metal parts: 2000 between operating power circuit and control output circuit: 2000
Impulse withstand voltage	between power terminals: 6 kV between current-carrying terminals and exposed non-curernt-carrying metal parts: 6 kV
Noise immunity	Between power terminals: +/- 480 V Between input terminals: +/- 500 V Square-wave noise by noise simulator (Pulse width: 100 ns/1 us, Rise: 1-ns)
Static immunity	Mulfunction: 8 kV
Vibration resistance （Destruction）	10 to 55 Hz, 0.75 mm single amplitude in each 3 directions for 2 hours
Vibration resistance （Malfunction）	10 to 55 Hz 0.5 mm single amplitude in each 3 directions for 10 min
Shock resistance （Destruction）	300 m/s**2, in each 6 directions (3 axes) 3 times
Shock resistance （Malfunction）	100 m/s**2, in each 6 directions (3 axes) 3 times
Mechanical life	10000000 operations min. (under no load at 1800 operations/h)
Electrical life	100000 operations min. (3 A at 250 VAC resistive load at 1800 operations/h)
Degree of protection	Panel surface: IP30
Mounting method	Flush mounting / Surface mounting
External connection method	8-pin round socket
Case color	Light gray (Munsell 5Y7/1)
Accessory (sold separately)	Y92A-48D: Soft Cover Y92A-48B: Hard Cover Y92F-30: Flush Mounting Adapter
Weight	約110g