Solid-state Timer
Image
| Rated supply voltage |
24VDC If power supply incorporates a single-phase full-wave rectifier. |
|---|---|
| Control output (Type) |
Time-limit: 4PDT |
| External connection method |
Plug-in terminal |
As of August 8, 2016
| Rated supply voltage | 24VDC If power supply incorporates a single-phase full-wave rectifier. |
|---|---|
| Operating voltage range | 85% to 110% of rated supply voltage |
| Power consumption ( Relay ON ) | 1.1W(at 24 VDC) |
| Power consumption ( Relay OFF ) | 0.1W(at 24 VDC) |
| Reset voltage | 10% max. of rated supply voltage |
| Number of time ranges | 4 |
| Time ranges | 0.1s~1s / 1s~10s / 0.1min~1min / 1min~10min |
| Operating mode | ON delay, Interval, Flicker OFF start, Flicker ON start, Pulse Operation (use in interval mode, connect power supply terminals as pulse operation) |
| Control output (Type) | Time-limit: 4PDT |
| Control output (Contact output) | Switching capacities (resistive load (cos (phi) = 1)): 250VAC 3A Minimum applicable load: 1 mA at 1 VDC (failure level: P) |
| Ambient temperature | Operating: -10 to 50℃ Storage: -25 to 65℃ |
| Ambient humidity | 使用時: 35~85% |
| Accuracy of operating time | +/- 1% max.(FS) (+/- 1% +/- 10 ms max. in a ragen of 1 s) |
| Setting error | -10 to 10% +/- 50 ms max. (FS) |
| Reset time | 0.1 s max. (including halfway reset) |
| Influence of voltage | +/- 2% FS max. |
| Influence of temperature | +/- 2% FS max. |
| Insulation resistance | 100 MΩ (at 500 VDC) |
| Dielectric strength | between current carrying terminals and exposed non-current carrying metal parts: 2000 VAC, 50/60 Hz for 1 min (Terminal screw sections are not excluded) between control output terminals and operating circuit: 2000 VAC, 50/60 Hz for 1 min between contacts of different poles: 1500 VAC, 50/60 Hz for 1 min between non-continuous contacts: 1000 VAC, 50/60 Hz for 1 min |
| Impulse withstand voltage | between power terminals: 1 kV between exposed non-current-carrying metal parts: 1.5 kV |
| Noise immunity | +/- 1.5 kV square-wave noise by noise simulator (pulse width: 100 ns/1 us, 1-ns rise) |
| Static immunity | Mulfunction: 4 kV Destruction: 8 kV |
| Vibration resistance (Destruction) | 10 to 55 Hz, 0.75 mm single amplitude each in X, Y, and Z directions for 1 hours |
| Vibration resistance (Malfunction) | 10 to 55 Hz, 0.5 mm single amplitude each in X, Y, and Z directions for 10 min |
| Shock resistance (Destruction) | 1000 m/s**2, 3 times each 6 directions |
| Shock resistance (Malfunction) | 100 m/s**2, 3 times each 6 directions |
| Mechanical life expectancy (relayoutput) | 10000000 operations min. (under no load at 1800 operations/h) |
| Electrical life expectancy (relay output) | 200000 operations min. (3 A at 250 VAC, resistive load at 1800 operations/h) |
| Degree of protection | IP40 |
| External connection method | Plug-in terminal |
| Case color | Munsell 5Y7/1 (Light gray) |
| Weight (Main) | Approx. 50 g |
As of August 8, 2016
As of August 8, 2016

Caution: All_units_are_in_millimeters_unless_otherwise_indicated.
As of August 8, 2016
As of August 8, 2016

As of August 8, 2016
As of August 8, 2016





As of August 8, 2016
As of August 8, 2016

As of August 8, 2016
about this Product