Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
E3Z-L81-IL2 2M
IO-Link Photoelectric Sensor
Image
Diffuse-reflective, Sensing distance: 60 to 120 mm, IO-Link, Transmission speed: COM2 (38.4 kbps), Light-ON/Dark-ON selectable, PNP output, Pre-wired models (2 m)
| Sensing method |
Diffuse-reflective |
|---|---|
| Sensing distance |
60 mm to 120 mm (White paper 100 x 100 mm) |
| Light source |
Red LED (Emission wave length: 650 nm) |
| Connection method |
Pre-wired models (Cable length: 2 m) |
- Ratings/Performance
As of March 3, 2017
| Shape | Square type |
|---|---|
| Sensing method | Diffuse-reflective |
| Sensing distance | 60 mm to 120 mm (White paper 100 x 100 mm) |
| Spot size | 2.5 mm dia. (At sensing distance of 90 mm) |
| Minimum sensing object | 0.1 mm dia. (Pure copper wire) |
| Light source | Red LED (Emission wave length: 650 nm) |
| Power supply voltage | 10 to 30 VDC (ripple (p-p) 10% included) |
| Current consumption | 30 mA max. |
| Control output | PNP open collector output 30 VDC max. Load current: 100 mA max. Residual voltage: 1 V max. (Load current Less than 10mA)/Residual voltage: 2 V max. (Load current: 10 to 100 mA) |
| Communications | IO-Link Ver1.1 Transmission speed: COM2 (38.4 kbps) Data length: PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) Minimum cycle time: 2.3 ms |
| Operation mode | Light-ON/Dark-ON selectable |
| Protective circuit | Output short-circuit protection Output reverse polarity protection Power supply reverse polarity protection Mutual interference prevention |
| Response time | 1 ms max. |
| Sensitivity setting | Sensitivity adjuster / IO-Link communications |
| Ambient illuminance | Incandescent lamp: 3000 lux max., Sunlight: 10000 lux max. |
| Ambient temperature (Operating) | -25 to 55 ℃ (with no icing or condensation) |
| Ambient temperature (Storage) | -40 to 70 ℃ (with no icing or condensation) |
| Ambient humidity | Operating: 35 to 85% Storage: 35 to 95% (with no icing or condensation) |
| Insulation resistance | 20 MΩ min. at 500 VDC |
| Dielectric strength | 1000 VAC at 50/60 Hz for 1 min |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 500 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC: IP67 |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Indicator | Standard I/O mode (SIO mode): Operation indicator (orange, lit) and stability indicator (green, lit) IO-Link mode: Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
| Weight (packed state) | Approx. 65 g |
| Material | Case: PBT Lens: Denatured Polyarylate Display: Denatured Polyarylate |
| Accessories | Instruction manual |
As of March 3, 2017
- Dimensions
As of March 3, 2017
As of March 3, 2017
- Output circuit
As of March 3, 2017
As of March 3, 2017
Series
about this Product
Top of page